LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Turn Signal And Multifunction Switch Assembly
    GM2215420Courtesy of GENERAL MOTORS COMPANY
  1. Position the turn signal and multifunction switch (2) on the steering column.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the turn signal and multifunction switch bolts (1) and tighten to 3 N.m (27 lb in).
  3. Connect the turn signal and multifunction switch electrical connector.
  4. Install Steering Column Lower Trim Cover Steering Column Trim Cover Replacement 
  5. Install Steering Column Upper Trim Cover Steering Column Trim Cover Replacement 
  6. Install Steering Wheel Steering Wheel Replacement 
  7. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals