LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> Parking Assist System Malfunction >> Circuit/System Verification >> With UD7

With UD7

  1. Ignition ON.
  2. Verify the scan tool Parking Assist Switch parameter changes between Active and Inactive when cycling the parking assist switch.
    • If the parameter does not change between Active and Inactive 

      Refer to Circuit/System Testing - Parking Assist Switch Malfunction.

    • If the parameter changes between Active and Inactive 
  3. Verify the park assist system is enabled.
    • If the park assist system is manually disabled 

      Enable the system. Refer to the vehicle owners manual for instructions on enabling the system.

    • If the park assist system is enabled 
  4. Verify the parking assist switch indicator turns ON and OFF when commanding the Parking Assist Switch LED On and Off with a scan tool.
    • If the indicator does not turn ON and OFF 

      Refer to Circuit/System Testing - Parking Assist Switch Indicator Malfunction.

    • If the indicator turns ON and OFF 
  5. Transmission in R.
  6. Verify the scan tool Park Assist System Status parameter is Enable.
    • If the parameter is not Enabled 

      Refer to Diagnostic Aids to determine the cause of the inhibit.

    • If the parameter is Enabled 
  7. All OK.
scientia non olet · About LEMON Manuals