LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Specifications >> Fastener Specifications

Fastener Specifications

Application Specification
Metric English
Lower Control Arm to Steering Knuckle Nut (1)
  • First Pass:
 35 N.m 26 lb ft
  • Final Pass:
 30 - 45 Degrees
Front Lower Control Arm Bushing Bolt (1)
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 30 - 45 Degrees
Front Lower Control Arm Bushing Bolt and Nut (1)
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 90 - 105 Degrees
Front Suspension Strut Mount Nut (1) 45 N.m 33 lb ft
Front Wheel Bearing And Hub Bolt (1)
  • First Pass:
 90 N.m 66 lb ft
  • Final Pass:
 60 - 75 Degrees
Front Shock Absorber Upper Nut (1)
  • First Pass:
 35 N.m 26 lb ft
  • Final Pass:
 30 - 45 Degrees
Front Stabilizer Shaft Link Nut (1) 65 N.m 48 lb ft
Front Stabilizer Shaft Bolt (1)
  • First Pass:
 22 N.m 16 lb ft
  • Final Pass:
 30 - 45 Degrees
Steering Gear Outer Tie Rod to Steering Knuckle Nut (1) 35 N.m 26 lb ft
Steering Knuckle to Strut Assembly Nut and Bolt (1)
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 30 - 45 Degrees
Front Wheel Speed Sensor Bolt 6 N.m 53 lb in
(1) = Use NEW Fastener.
scientia non olet · About LEMON Manuals