Rear License Plate Lamp Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear License Plate Lamp

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Insert a small flat-blade tool at the arrow location of the lamp housing edge. Push inward slightly and rotate the lamp downward. Pull the lamp down far enough out to access the lamp electrical connector harness.
1	License Plate Lamp Electrical Connector Harness Procedure Disconnect the electrical connector from the socket.
2	License Plate Lamp Socket Procedure Rotate the lamp socket a half turn and remove. Replace the bulb at this time if needed.
3	Rear License Plate Lamp