LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the front compartment fuse block cover (1).
    Fig 1: Fuse Block & Cover
    GM2575371Courtesy of GENERAL MOTORS COMPANY
  3. Remove the positive battery cable cover.
  4. Remove the positive battery cable at the front compartment junction block.
  5. Remove the electrical steering wiring harness (1) if equipped.
    Fig 2: Electrical Steering Wiring Harness
    GM2636230Courtesy of GENERAL MOTORS COMPANY
  6. Loosen the junction block bolts (1)
    Fig 3: Junction Block & Bolts
    GM2575374Courtesy of GENERAL MOTORS COMPANY
  7. Unclip the front compartment fuse block from the front compartment fuse block housing.
  8. Disconnect the positive battery cable (1).
    Fig 4: Positive Battery Cable
    GM2636297Courtesy of GENERAL MOTORS COMPANY
  9. Remove the electrical connectors from the front compartment fuse block housing.
    Fig 5: Junction Block Base & Nut
    GM2575375Courtesy of GENERAL MOTORS COMPANY
  10. Remove the windshield washer solvent container filler tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement .
  11. Disconnect the wiring harness from the junction block base.
  12. Remove the junction block nut (1) from the block base.
  13. Remove the junction block base (2) from the inner wheelhouse.
scientia non olet · About LEMON Manuals