Turn Signal Multifunction Switch Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Turn Signal Multifunction Switch

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement . If equipped with BTM, remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement . If not equipped with BTM, remove the ignition lock cylinder bezel. Refer to Ignition Lock Cylinder Bezel Replacement (Without BTM) .
1	Turn Signal Multifunction Switch Procedure Disconnect electrical connectors. Release the retaining tabs and remove the turn signal multifunction switch from the turn signal switch bracket.

Callout

Component Name

Preliminary Procedures

Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .
If equipped with BTM, remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
If not equipped with BTM, remove the ignition lock cylinder bezel. Refer to Ignition Lock Cylinder Bezel Replacement (Without BTM) .

Turn Signal Multifunction Switch

Procedure

Disconnect electrical connectors.
Release the retaining tabs and remove the turn signal multifunction switch from the turn signal switch bracket.