LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement - Fuel Feed Pipe >> Installation Procedure

Installation Procedure

  1. Install the fuel tank fuel feed pipe (4) to the fuel tank bracket (5) and the fuel pressure sensor clip (3).
    Fig 1: Electrical Connector And Fuel Pressure Sensor Clip
    GM4091454Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical connector. (2)
  3. Remove the EN-6015  plugs from all connections.
  4. Connect the fuel tank fuel feed pipe (4) to the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Fuel Tank Replacement » Install
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals