LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Fuel Injection Fuel Rail Assembly Removal and Installation » Remove
  2. Disconnect the fuel injection fuel rail fuel pressure sensor wiring harness plug (1) from the fuel rail fuel pressure sensor (2).
    Fig 1: Fuel Injection Fuel Rail Fuel Pressure Sensor Wiring Harness Plug And Fuel Rail Fuel Pressure Sensor
    GM3682588Courtesy of GENERAL MOTORS COMPANY
  3. Cut the cable tie (3).
  4. Remove 4 the fuel injector wiring harness (3) from the fuel injector (4).
    Fig 2: Fuel Injector And Wiring Harness
    GM3682583Courtesy of GENERAL MOTORS COMPANY
  5. Clip out the fuel injector wiring harness (2) from the fuel rail.
  6. Cut the 7 cable ties (1, 5).
scientia non olet · About LEMON Manuals