LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery to Fuse Block Cable Replacement >> Removal Procedure

Removal Procedure

  1. Battery Negative Cable Disconnection and Connection » Disconnect
  2. Rear Compartment Floor Panel Trim» Remove
  3. Rear Compartment Floor Panel Trim Support» Remove
  4. Open the left rear door.
  5. Fold the rear seat back cushion forward to get a better access to the battery.
  6. Unlock the 3 retaining tabs (3) on the battery fuse block cover.
    Fig 1: Fuse Block Cover, Retainers And Retaining Tabs
    GM3684334Courtesy of GENERAL MOTORS COMPANY
  7. Remove the fuse block cover (1). Remove the rear fuse block cover retainers (2) from the fuse block.
  8. Loosen the battery positive cable nut (4).
    Fig 2: Battery To Fuse Block Cable
    GM3684335Courtesy of GENERAL MOTORS COMPANY
  9. Remove the body extension wiring harness bolt (3).
    NOTE: Counterhold the battery positive clamp.
  10. Remove the body extension wiring harness (2).
  11. Remove the battery positive cable to fuse block nut (5).
  12. Remove the battery to fuse block cable (1).
scientia non olet · About LEMON Manuals