Installation Procedure

Steering Knuckle (1)» Install

Fig 1: Steering Knuckle
Courtesy of GENERAL MOTORS COMPANY
Front Lower Control Arm (1) @ Steering Knuckle» Install - Lower Control Arm Replacement

Fig 2: Front Lower Control Arm
Courtesy of GENERAL MOTORS COMPANY
Strut Assembly (1) @ Steering Knuckle» Install - Strut Assembly Removal and Installation

Fig 3: Strut Assembly
Courtesy of GENERAL MOTORS COMPANY
Steering Linkage Outer Tie Rod (1) @ Steering Knuckle» Install - Steering Linkage Outer Tie Rod Replacement

Fig 4: Steering Linkage Outer Tie Rod
Courtesy of GENERAL MOTORS COMPANY
Apply grease 15 mm into steering knuckle (1).
NOTE: Do not apply grease into the ABS sensor hole.

NOTE: Do not apply grease on the flange.

Fig 5: Steering Knuckle
Courtesy of GENERAL MOTORS COMPANY
Front Wheel Bearing and Hub Replacement (1)» Install

Fig 6: Front Wheel Bearing and Hub
Courtesy of GENERAL MOTORS COMPANY
Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation