LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Cruze L >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Disconnect the engine harness connector (3) from the starter solenoid.
    Fig 1: Battery Positive Cable Terminal And Engine Harness Connector
    GM2814017Courtesy of GENERAL MOTORS COMPANY
  4. Remove the battery positive cable fastener (2) and remove the battery positive cable terminal (1), from the starter solenoid.
  5. Remove the starter mounting fasteners (2) and remove the starter (1).
    Fig 2: Starter Mounting Fasteners And Starter
    GM2814022Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals