LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

  1. Loosen the rear suspension adjust link cam nut (1).
    Fig 1: Rear Suspension Adjust Link Cam Nut
    GM3290959Courtesy of GENERAL MOTORS COMPANY
  2. Rotate the inner cam bolt (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
  3. Tighten the rear suspension adjustment link cam nut to 70 N.m (52 lb ft).
    CAUTION: Refer to Fastener Caution .
  4. Check the toe setting after tightening.
  5. Adjust the toe setting if necessary.
scientia non olet · About LEMON Manuals