LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Instrument Panel Insulator Panel Replacement - Left Side » Remove
  3. Instrument Panel Knee Bolster Replacement » Remove
  4. Disconnect the electrical connectors from the steering column control module and bracket.
  5. Steering Column Control Module Bracket Bolt (1)» Remove [2x]
    Fig 1: Steering Column Control Module Bracket Bolts
    GM3407265Courtesy of GENERAL MOTORS COMPANY
  6. Steering Column Bracket Bolt (2)» Remove
  7. Steering Column Control Module Bracket (3)» Remove
  8. Transfer components as necessary.
scientia non olet · About LEMON Manuals