LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LT1, LT4) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left fuel tank. Refer to Fuel Tank Replacement - Left Side .
  2. Using the CH-48482  lock ring tool, turn the fuel pump module locking ring (1) counterclockwise and remove lock ring.
    Fig 1: Fuel Pump Module Locking Ring
    GM3415307Courtesy of GENERAL MOTORS COMPANY
    NOTE: The fuel pump module is spring loaded and will spring upward when the locking ring is removed.
  3. Lift the fuel tank fuel pump module (1) carefully to disconnect the lines from the fuel tank fuel pump module (1) inside the tank.
    Fig 2: Fuel Tank Fuel Pump Module
    GM3415306Courtesy of GENERAL MOTORS COMPANY
  4. Remove the fuel tank fuel pump module (1) from the tank.
scientia non olet · About LEMON Manuals