Radio Control Assembly Replacement

Fig 1: Radio Control Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement . Carefully pull radio knobs straight off to allow the radio control to be separated from the trim plate.
1	Radio Control Fasteners (Qty: 10) CAUTION: Refer to Fastener Caution . NOTE: The removal and installation of these fasteners will require the use of a T20 Torx Plus® Tamper Resistance drive tool. Tighten 5 N.m (44 lb in)
2	Radio Control Assembly Procedure Disconnect the electrical connections. When replacing the radio control assembly, transfer all necessary components.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement .
Carefully pull radio knobs straight off to allow the radio control to be separated from the trim plate.

Radio Control Fasteners (Qty: 10)

CAUTION: Refer to Fastener Caution .

NOTE: The removal and installation of these fasteners will require the use of a T20 Torx Plus® Tamper Resistance drive tool.

Tighten
5 N.m (44 lb in)

Radio Control Assembly

Procedure