Installation Procedure
- Install the front door window to the door from the outside of the vehicle.
Courtesy of GENERAL MOTORS COMPANY
CAUTION:Refer to Fastener Caution .
- Bolt (1) - Install [2x] 5.5 N.m (49 lb in) NOTE:
Inspect the window for proper operation before installing the door trim.
- Adjust if necessary, Front Side Door Window Adjustment
- Front Side Door Water Deflector - Install
- Install the window switch to the door trim panel.
- Front Side Door Trim Panel Replacement - Install
- Front Side Door Window Belt Outer Reveal Molding Replacement - Install
- Power Mirror Replacement - Install
- Perform any adjustment, programming or setup procedures that are required when a component or module is removed or replaced. Power Window Reinitialization