LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Camaro SS, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Battery, Charging System And Starting System) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2015 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Battery Hold Down Retainer Bolt 22 N.m 16 lb ft
Battery Negative Cable Bolt (at rear compartment floor) 25 N.m 18 lb ft
Battery Negative Cable Terminal Nut 15 N.m 11 lb ft
Battery Positive Cable Nut (at the fuse block) 15 N.m 11 lb ft
Battery Positive Cable Nut (at the junction block) 15 N.m 11 lb ft
Battery Positive Cable Nut (at the starter) 13 N.m 115 lb in
Battery Positive Cable Terminal Nut 5 N.m 44 lb in
Engine Harness and Battery Positive Cable Harness Retainers 12 N.m 9 lb ft
Generator BAT Terminal Nut 15 N.m 11 lb ft
Generator Bolt 58 N.m 43 lb ft
Generator Bracket Bolt (at the front of the bracket) 50 N.m 37 lb ft
Generator Bracket Fasteners (LFX ) 22 N.m 16 lb ft
Generator Bracket Nut (at the front of the bracket) 50 N.m 37 lb ft
Generator Stud (LS7, LSA) 20 N.m 15 lb ft
Starter 58 N.m 43 lb ft
Starter Motor Mounting Bolt 58 N.m 43 lb ft
Starter Shield Bolt 5 N.m 44 lb in