Generator Bracket Replacement (L99, LS3)

WARNING: This page is about a different car, the 2015 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator, Stud & Fasteners (L99, LS3)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the generator. Refer to Generator Replacement (L99, LS3) .
1	Nut CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Bolt (Qty: 2) Tighten 50 N.m (37 lb ft)
3	Generator Procedure Disconnect the engine harness generator connector. Transfer the drive belt idler pulley, if necessary.