Installation Procedure
- Install Battery Negative Cable Extension Cable (2)
- Engage Battery Negative Cable Extension Cable Retainer (1)
- Install Battery Negative Cable Extension Cable Fastener (2) and tighten to 9 N.m (80 lb in)
- Install Protective Cap (1)
- Install Battery Negative Cable Extension Cable Fastener (1) and tighten to 40 N.m (30 lb ft)
- Engage Battery Negative Cable Extension Cable Retainer (2)
- Install Radiator Surge Tank Replacement (LGX) (6)
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .