LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Volt >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Tire Pressure Indicator Receiver Programming and Setup (UJN) >> Replace and Program ECU or Reprogram ECU

Replace and Program ECU or Reprogram ECU

This ECU does not require SPS programming but does require the following setup procedures after a new ECU is installed:

Drive the vehicle for at least 9 minutes above 40 km/h (25 MPH) to perform the K65 tire pressure indicator module autolearn process.

scientia non olet · About LEMON Manuals