LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Trax LTZ, FWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Cooler Replacement >> Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Front Bumper Fascia Replacement (Trax)Front Bumper Fascia Replacement (Encore) - Remove
    3. Fig 1: Power Steering Gear Outlet Hose And Clamp
    GM2812352Courtesy of GENERAL MOTORS COMPANY
  3. Power Steering Gear Outlet Hose Clamp to Power Steering Fluid Cooler - Loosen
  4. Power Steering Gear Outlet Hose to Power Steering Fluid Cooler - Separate
  5. Remove the plastic push pin (3) from the power steering fluid cooler bracket.
    6. Fig 2: P/S Fluid Reservoir Inlet Pipe
    GM2810052Courtesy of GENERAL MOTORS COMPANY
  6. Power Steering Fluid Reservoir Inlet Pipe Clamp to Power Steering Fluid Cooler - Loosen
  7. Power Steering Fluid Reservoir Inlet Pipe to Power Steering Fluid Cooler - Separate
    8. Fig 3: Power Steering Fluid Cooler
    GM2812359Courtesy of GENERAL MOTORS COMPANY
  8. Power Steering Fluid Cooler Nut - Remove
  9. Remove the power steering fluid cooler (2) from the vehicle.
scientia non olet · About LEMON Manuals