Circuit/System Verification
NOTE:
- DTC P129E and P12A8 are informational DTCs.
- Diagnose all other engine control module DTCs prior to DTC P129E or P12A8.
- Verify that no other DTCs are set except for DTC P129E or P12A8.
- If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If only DTC P129E or P12A8 is set
- If any other DTCs are set
- Replace the K111 Fuel Pump Power Control Module.
- Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
- If DTC sets
Replace the K20 Engine Control Module.
- If DTC does not set
- If DTC sets
- All OK.