LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0460: Steering Wheel Angle Sensor >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the DTC is not set.
    • If the DTC is set 
    1. Calibrate the K43 Power Steering Control Module. Refer to Power Steering Control Module Programming and Setup .
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC
      • If the DTC sets, replace the steering column assembly.
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK.