Radio Replacement

Fig 1: Radio Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Battery Disconnect Warning . Preliminary Procedures Disconnect the battery negative cable. Remove I/P center molding. Refer to Instrument Panel Center Molding Replacement .
1	Radio Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Radio Assembly Procedure Disconnect electrical components. After replacement, refer to Control Module References for programming and setup information.

Callout

Component Name

WARNING: Refer to Battery Disconnect Warning .

Preliminary Procedures

Disconnect the battery negative cable.
Remove I/P center molding. Refer to Instrument Panel Center Molding Replacement .

Radio Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten
3 N.m (27 lb in)

Radio Assembly

Procedure

Disconnect electrical components.
After replacement, refer to Control Module References for programming and setup information.