LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Spark EV >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component or Spring Replacement >> Assembly Procedure

Assembly Procedure

  1. Position the strut in a suitable holding device.
    Fig 1: Cartridge Upper Cover
    GM2327476Courtesy of GENERAL MOTORS COMPANY
  2. Install the front suspension strut bumper (3).
  3. Install the front coil spring (2).
  4. Install the CH-46558  compressor on the front coil spring (2) and compress the spring.
  5. Install the front suspension cartridge upper cover (1).
  6. Install the front suspension strut mount bearing assembly (2).
    Fig 2: Strut Nut And Strut
    GM2327479Courtesy of GENERAL MOTORS COMPANY
  7. Install the front suspension strut lower mounting nut (1) and tighten to 65 N.m (48 lb ft).
    CAUTION: Refer to Fastener Caution .
  8. Remove the CH-46558  compressor (1) from the front coil spring.
    Fig 3: View Of CH-46558 Front Spring Compressor
    GM2327481Courtesy of GENERAL MOTORS COMPANY
  9. Remove the strut assembly from the holding device.
  10. Install the strut assembly. Refer to Strut Assembly Removal and Installation .
scientia non olet · About LEMON Manuals