Removal Procedure

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the fuse block and battery positive cable cover.
Remove the battery tray. Refer to Battery Tray Replacement .
Remove the battery positive nut (1) and the battery positive cable (2), from the battery positive cable junction block.

Fig 1: Battery Positive Cable & Nut
Courtesy of GENERAL MOTORS COMPANY
Remove the battery negative cable nut (1) and the battery negative cable (2), from the chassis frame stud.

Fig 2: Battery Negative Cable & Nut
Courtesy of GENERAL MOTORS COMPANY
Remove the drivetrain and front suspension frame skid plate. Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement .
Remove the battery positive cable nut (2) and the battery positive cable (3), from the back of the generator.

Fig 3: Battery Positive Cable, Nut & Generator Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Remove the battery negative cable stud/nut (1) and the starter solenoid nut (2).

Fig 4: Battery Negative Cable Stud & Starter Solenoid Nut
Courtesy of GENERAL MOTORS COMPANY
Remove the battery positive and negative cable (1) from the engine compartment.

Fig 5: Battery Cables
Courtesy of GENERAL MOTORS COMPANY

NOTE: Visualize the routing of the battery positive and negative cable within the engine compartment.