Installation Procedure

Install the battery (3) to the battery tray floor.

Fig 1: Battery, Junction Block & Bolt
Courtesy of GENERAL MOTORS COMPANY
Install the battery positive cable with junction block (2) to the battery (3).
Install the battery retainer (2).

Fig 2: Battery Retainer & Bolt
Courtesy of GENERAL MOTORS COMPANY
Tighten the battery retainer bolt (1) to 22 N.m (16 lb ft).
CAUTION: Refer to Fastener Caution .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .