LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Sonic RS, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    Fig 1: Battery Current Sensor, Negative Cable & Mounting Components
    GM2507827Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the battery current sensor from the body harness connector.
  3. Unclip the battery current sensor from the battery tray.
  4. Remove the battery tray. Refer to Battery Tray Replacement .
  5. Remove the battery negative cable frame ground nut (4) and terminal (5).
  6. Slide the battery current sensor (2) off the battery negative cable (1).
    Fig 2: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
    NOTE: Observe the position of the battery current sensor when removing.
scientia non olet · About LEMON Manuals