LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Dual Battery) Battery Negative Cable Disconnection and Connection (Single Battery) .
    2. Fig 1: Support Cross Brace Fasteners And Support Cross Brace
    GM2964358Courtesy of GENERAL MOTORS COMPANY
  2. Remove the support cross brace fasteners (1) and remove the support cross brace (2), from above the battery.
    3. Fig 2: Battery Positive Cable Clamp Cover And Loosen Battery Positive Cable Clamp Fastener
    GM2964092Courtesy of GENERAL MOTORS COMPANY
  3. Open the battery positive cable clamp cover (1) and loosen the battery positive cable clamp fastener (2).
  4. Remove the battery fuse block (3) and set aside.
    5. Fig 3: Battery Retainer Fastener And Battery Retainer
    GM2964091Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery retainer fastener (1) and remove the battery retainer (2).
  6. Reposition the radiator surge tank without draining the coolant. Refer to Radiator Surge Tank Replacement (L83, L86)Radiator Surge Tank Replacement (LV1, LV3)Radiator Surge Tank Replacement (LC8, L96)Radiator Surge Tank Replacement (LML) .
  7. Remove the battery (3) from the vehicle.
scientia non olet · About LEMON Manuals