Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
- Loosen the jam nut on the inner tie rod (1).
- Rotate the inner tie rod (2) to the required toe specification setting. Wheel Alignment Specifications (Regular Cab) Wheel Alignment Specifications (Crew Cab) Wheel Alignment Specifications (Extended Cab) Wheel Alignment Specifications (2500 and 3500 Crew Cab - Diesel) Wheel Alignment Specifications (2500 and 3500 Crew Cab - Gas) Wheel Alignment Specifications (2500 and 3500 Extended Cab - Diesel) Wheel Alignment Specifications (2500 and 3500 Extended Cab - Gas) Wheel Alignment Specifications (2500 and 3500 Regular Cab - Diesel) Wheel Alignment Specifications (2500 and 3500 Regular Cab - Gas)
- Install the jam nut (1) on the tie rod and tighten to 75 N.m (55 lb ft).
- Check the toe setting after tightening.
- Re-adjust the toe setting if necessary.
- Check and center steering angle sensor. Steering Angle Sensor Centering
CAUTION: