Component Testing
- Ignition OFF, disconnect the harness connector at the driver door lock.
- Test for infinite resistance between the signal terminal and the ground terminal listed below with the switch in the open position:
- Signal terminal 4 and ground terminal 6 (Without UA6)
- Signal terminal 6 and ground terminal 8 (With UA6)
- If less than infinite resistance
Replace the driver door lock.
- If infinite resistance
- Test for less than 3 Ω between the signal terminal and the ground terminal listed below with the switch in the closed position.
- Signal terminal 4 and ground terminal 6 (Without UA6)
- Signal terminal 6 and ground terminal 8 (With UA6)
- If 3 Ω or greater
Replace the driver door lock.
- If less than 3 Ω
- All OK