LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala Limited LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Power Steering System) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Power Steering Assist Motor Bolt (NJ1) (Requires a NEW bolt.)  8 N.m 71 lb in
Power Steering Assist Motor Pivot Bolt (NJ2) (Requires a NEW bolt.)  22 N.m 16 lb ft
Steering Gear Bolt (Requires a NEW bolt.) 
  • First Pass:
110 N.m 81 lb ft
  • Final Pass:
150-165 degrees
Steering Gear Heat Shield Bolt 9 N.m 80 lb in
Steering Gear Housing Cover Bolt (M6, NJ2) (Requires a NEW bolt.)  10 N.m 89 lb in
Steering Gear Housing Cover Bolt (M8, NJ2) (Requires a NEW bolt.)  22 N.m 16 lb ft
Steering Gear Wiring Harness Bracket Bolt 9 N.m 80 lb in
Steering Linkage Inner Tie Rod 100 N.m 74 lb ft
Steering Linkage Outer Tie Rod Nut
  • First Pass:
35 N.m 26 lb ft
  • Final Pass:
30-45 degrees