LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Lower Control Arm Ball Joint Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Lower Ball Joint
    GM385752Courtesy of GENERAL MOTORS COMPANY
  1. Position the new ball joint in the lower control arm.
    2. Fig 2: Identifying Ball Joint Retaining Nuts
    GM385756Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Install the NEW ball joint bolts facing downward.

  2. Install the NEW ball joint bolts.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the NEW ball joint retaining nuts.

    Tighten 

    Tighten the ball joint nuts to 68 N.m (50 lb ft).

  4. Install the lower control arm. Refer to Lower Control Arm Replacement .
  5. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation .
  6. Remove the support and lower the vehicle. Refer to Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals