LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Front Lower Control Arm Bushing Replacement (Horizontal) >> Removal Procedure

Removal Procedure

  1. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  2. Secure the lower control arm in a vise.
    3. Fig 1: Assembling Bushing Removal Tools
    GM1171032Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    Use a 1/2 x 20 in standard thread nut with the puller bolt.

  3. Assemble the bushing removal tools as indicated:
    1. The nut (1)
    2. The J 21474-01  control arm bushing service set washer (2)
    3. The J 21474-01  control arm bushing service set bearing (3)
    4. The J 21474-5  control arm bushing receiver (4)
    5. The J 21474-01  control arm bushing service set puller bolt (5)
  4. Tighten the puller bolt (5) until the bushing is removed.
  5. Disassemble the J 21474-01  control arm bushing service set and J 21474-5  control arm bushing receiver.
scientia non olet · About LEMON Manuals