LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake fluid level indicator switch electrical connector.
  2. Pressing inward through the access hole in the front of the master cylinder reservoir with a small punch or similar blunt tool, release the brake fluid level indicator switch locking tab.
    Fig 1: Brake Fluid Level Indicator Switch (J64)
    GM2756214Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake fluid level indicator switch (1).
scientia non olet · About LEMON Manuals