Fuse Block Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuse Block Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Replacement (without KL9) and Battery Negative Cable Replacement (with KL9) . Disconnect the auxiliary battery negative cable. Refer to Auxiliary Battery Negative Cable Replacement (With Start\Stop) Remove the battery positive fuse block cable. Refer to Battery Positive Fuse Block Cable Replacement
1	Fuse Block Positive Cable and Engine Power Supply Cable Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 12 N.m (106 lb in)
2	Fuse Block Terminal Wiring Harness Nut (Qty: 3) Tighten 4.7 N.m (42 lb in)
3	Battery Hold Down Retainer Bolt Tighten 15 N.m (11 lb ft)
4	Battery Hold Down Retainer
5	Fuse Block Procedure Unclip and remove the fuse block from the battery.