Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the electronic parking brake control modulator bracket, if removed. Refer to Electronic Parking Brake Control Modulator Bracket Replacement .
Install the electronic parking brake control module to the vehicle.
Install the electronic parking brake control module and bracket assembly.

Fig 1: Electronic Parking Brake Control Module Nuts
Courtesy of GENERAL MOTORS COMPANY
Install the electronic parking brake control module nuts (1) and tighten to 10 N.m (89 lb in).
CAUTION: Refer to Fastener Caution .
Install the parking brake cable nut (1) and tighten to 6 N.m (53 lb in).

Fig 2: Parking Brake Cable Nut
Courtesy of GENERAL MOTORS COMPANY

NOTE: When installing the parking brake cable nut to the electronic parking brake control module spindle, hold the spindle housing securely to avoid distorting the housing.
Connect the electronic parking brake control module electrical connector.
Install the left rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
Install the left rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Program the electronic parking brake control module. Refer to Electronic Parking Brake Control Module Programming and Setup .