LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B0967 or B0968: Parking Assist On/Off Switch Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC B0967 02 is not set.
    • If the DTC is set 

      Refer to Parking Assist Switch Malfunction.

    • If the DTC is not set 
  3. Verify that B0968 01 or B0968 06 is not set.
    • If the DTC is set 

      Refer to Parking Assist Switch Indicator Malfunction.

    • If the DTC is not set 
  4. Verify parking assist indicator turns on and off when commanding the Parking Assist Switch LED parameter On and Off with a scan tool.
    • If the LED does not turn On and Off 

      Refer to Circuit/System Testing - Parking Assist Switch Indicator Malfunction.

    • If the LED turns On and Off 
  5. Activate and deactivate the parking assist switch and verify the scan tool Park Assist Switch parameter changes between Active and Inactive.
    • If the Parking Assist Switch parameter does not change between Active and Inactive 

      Refer to Circuit/System Testing - Parking Assist Switch Malfunction.

    • If the Parking Assist Switch parameter changes between Active and Inactive 
  6. All OK.