LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala LT, 2.5L Eng VIN L >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Install the EBTCM assembly to the bracket.
  2. Install the EBTCM assembly bracket bolt (1) and tighten to 10 N.m (89 lb in).
    Fig 1: BPMV Assembly Bracket Bolts
    GM2739969Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Install the EBTCM assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
scientia non olet · About LEMON Manuals