LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala LS, 2.5L Eng VIN L >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
  1. Remove the electronic brake and traction control module (EBTCM) assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
  2. Remove the electronic brake control module (EBCM) bolts (1).
    Fig 1: EBCM Bolts
    GM2911763Courtesy of GENERAL MOTORS COMPANY
  3. Carefully separate the EBCM (1) from the hydraulic control unit (HCU).
    Fig 2: EBCM
    GM2911765Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not pry the components apart.
  4. Clean the sealing surfaces of the EBCM and the HCU with denatured alcohol and allow to dry.
scientia non olet · About LEMON Manuals