LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Impala LS, 2.5L Eng VIN L >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the EBCM (1) to the HCU.
    Fig 1: EBCM
    GM2911765Courtesy of GENERAL MOTORS COMPANY
  2. Install the EBCM bolts (1) and tighten to 5 N.m (44 lb in).
    Fig 2: EBCM Bolts
    GM2911763Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Install the EBTCM assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
  4. Program the EBCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals