LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Intake Manifold Runner Control Valve Actuator Replacement >> Installation Procedure

Installation Procedure

  1. Install the lever actuator (1) to the intake manifold runner link (2), while installing the intake manifold actuator (6) to the intake manifold (5).
    Fig 1: Intake Manifold Actuator Link Retainer And Bolts
    GM3213077Courtesy of GENERAL MOTORS COMPANY
  2. Install the 4 intake manifold actuator bolts (4) and tighten to 10 N.m (89 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the intake manifold runner link retainer (3).
  4. Install the intake manifold. Refer to Intake Manifold Replacement .
scientia non olet · About LEMON Manuals