Radio Replacement

Fig 1: Radio Mounting Hardware

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the radio control assembly. Refer to Radio Control Assembly Replacement . Remove the driver information display bezel. Refer to Driver Information Display Bezel Replacement .
1	Radio Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Radio Bolt Washer (Qty: 4)
3	Radio Procedure Disconnect electrical components. After replacement, refer to Control Module References for programming and set up information.