Communication Center Call Transceiver Programming and Setup
This device requires no SPS programming or setup. However, if the module has been replaced, the following procedures are required:
- Program the vehicle VIN number into the replacement part by making the following scan tool selections:
- Telematic Veh. Locate and Immo.
- Module Setup
- Program VIN
If for some reason the Tech 2 can not read the VIN, you will have to manually enter the VIN.
- After the VIN has been programmed into the module, the dealer will need to update the Brazil database with the new SIM number for the replacement part.
- If the vehicle has been disabled, the dealer will need to call the Brazil government hotline to have the unit reset.