Fuel Pump Power Control Module Replacement

Fig 1: Fuel Pump Power Control Module & Fastener

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the battery tray. Refer to Battery Tray Replacement .
1	Fuel Pump Power Control Module Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m(80 lb in)
2	Fuel Pump Power Control Module Procedure Disconnect the electrical connector. If replacing, reprogram the control module. Refer to Service Programming System (SPS) .

Callout

Component Name

Preliminary Procedure
Remove the battery tray. Refer to Battery Tray Replacement .

Fuel Pump Power Control Module Fastener (Qty: 2)

CAUTION:

Tighten
9 N.m(80 lb in)

Fuel Pump Power Control Module

Procedure

Disconnect the electrical connector.
If replacing, reprogram the control module. Refer to Service Programming System (SPS) .