Removal Procedure

Remove the rear floor stowage compartment. Refer to Rear Compartment Floor Stowage Trim Compartment Replacement .
Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
Remove the battery positive cable fuse block nut (1) and terminal (2) from the battery fuse block.

Fig 1: Battery Positive Cable Fuse Block Nut And Terminal
Courtesy of GENERAL MOTORS COMPANY
Remove the quarter inner trim finish panel. Refer to Quarter Inner Trim Finish Panel Replacement .
Separate the battery positive cable from the body harness, while working from the rear compartment towards the passenger compartment.
Remove the rear side door floor covering retainer. Refer to Rear Side Door Opening Floor Carpet Retainer Replacement

Fig 2: Battery Positive Cable
Courtesy of GENERAL MOTORS COMPANY
Detach the battery positive cable (1) from the rear passenger compartment.
Remove the interior trim panels (1). Refer to Center Pillar Trim Panel Replacement and Front Side Door Opening Floor Carpet Retainer Replacement .

Fig 3: Battery Positive Cable And Left Rocker Channel
Courtesy of GENERAL MOTORS COMPANY
Remove the battery positive cable (2) from the left rocker channel.
Detach the battery positive terminal (2), from the engine wiring junction block (3), with the nut (1).

Fig 4: Battery Positive Terminal, Engine Wiring Junction Block And Nut
Courtesy of GENERAL MOTORS COMPANY
Pull the battery positive cable (2) through the harness grommet (1).

Fig 5: Wiring Harness Grommet
Courtesy of GENERAL MOTORS COMPANY
Remove the battery positive cable from the vehicle.