LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Volt >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Removal and Installation .
    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
scientia non olet · About LEMON Manuals