LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Trax LTZ, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Front Suspension System) >> Repair Instructions >> Steering Knuckle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Knuckle Assembly
    GM2504711Courtesy of GENERAL MOTORS COMPANY
  1. Position the steering knuckle (1) on the vehicle.
  2. Strut Assembly@Steering Knuckle - Install - Strut Assembly Removal and Installation 
  3. Front Lower Control Arm@Steering Knuckle - Install - Lower Control Arm Replacement 
  4. Steering Linkage Outer Tie Rod@Steering Knuckle - Install - Steering Linkage Outer Tie Rod Replacement
  5. Front Brake Shield - Install - Front Brake Shield Replacement
  6. Front Wheel Drive Shaft@Steering Knuckle - Install - Front Wheel Drive Shaft Replacement - Left Side , or Front Wheel Drive Shaft Replacement - Right Side
  7. Front Wheel Speed Sensor@Steering Knuckle - Install - Front Wheel Speed Sensor Replacement
  8. Measure and adjust the wheel alignment. Wheel Alignment Measurement