LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Trax LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Disc Brake System) >> Repair Instructions >> Rear Brake Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement .
  4. Fig 1: Rear Brake Shield Bolts
    GM2771880Courtesy of GENERAL MOTORS COMPANY
  5. Remove the rear brake shield bolts (1).
  6. Fig 2: Rear Brake Shield
    GM2771881Courtesy of GENERAL MOTORS COMPANY
  7. Remove the rear brake shield (1).