LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the master cylinder reservoir, if removed. Refer to Master Cylinder Reservoir Replacement .
    2. Fig 1: Brake Fluid Level Indicator Switch
    GM2910018Courtesy of GENERAL MOTORS COMPANY
  2. Install the brake fluid level indicator switch (1) by pressing the switch firmly into the brake master cylinder reservoir.
  3. Connect the brake fluid level indicator switch electrical connector.
scientia non olet · About LEMON Manuals